Gutter
It is the key element of the Kaskada system. Our gutter is deep which makes it easy to drain water form the roof to a place indicated by you. The Kaskada gutter is mounted on so called “click”.
Material: Granite®Rain ArcelorMittal
Size: 3 mb and 4 mb, ø 125 mm
Package: 5 pcs. / packed in a foil sleeve
Downspout
The second important element of the Cascade system. Downspout drains water out of the gutter. It connects with an outlet hopper or an elbow. Our pipes end with specially profiled constriction due to which they connect directly with each other without a necessity to use connecting pieces. This reduces cost of the system.
Material: Granite®Rain ArcelorMittal
Size: 1 mb, 3 mb and 4 mb, ø 100 mm
Package: 1 pcs. / packed in a foil sleeve
Outlet hopper
Effective water drainage from the gutter to the outlet pipe depends on the hopper. It is manufactured from one element due to which a stitch is behind the hopper and is invisible after assembling.
Material: Granite®Rain ArcelorMittal
Size: ø 125 mm and ø 150 mm, ø 100 mm
Package: packed in a plastic sleeve plus a cardboard box
90° corner
Internal and external corner is used to connect gutters at house quoins. Similarly to the gutters, Kaskada quoins are connected on so called “click”. In places where the quoin connects with the gutter we use gutter connection pieces with a seal.
Material: Granite®Rain ArcelorMittal
Size: angle of 90° / ø 125 mm and ø 150 mm
Package: internal corner 10 pcs. / packed in a foil sleeve plus cartoon package, external corner 15 pcs. / packed in a foil sleeve plus cartoon package
Elbow
Element which connects the hopper and downspout. The elbow also helps to adjust the Kaskada system even with the most elaborated shape of the house.
Material: Granite®Rain ArcelorMittal
Size: angle of 60° / ø 100 mm
Package: packed in a plastic sleeve plus a cardboard box
Outlet elbow
This is the last link in the Kaskada system. Connected with the downspout drains water beyond the building. Characteristic double embosses at the end of the elbow decrease the water outlet velocity.
Material: Granite®Rain ArcelorMittal
Size: angle of 60° / ø 100 mm
Package: packed in a plastic sleeve plus a cardboard box
Access-outlet pipe
Installed in the drain pipe, it is designed to direct rainwater, if the flap is open, to the tank.
Material: powder-coated galvanised sheet metal
Size: ø 100 mm
Package: packed in a plastic sleeve plus a cardboard box
Tee
Enables joining two downspouts into one pipe.
Material: Granite®Rain ArcelorMittal
Size: angle of 60° / ø 100 mm / 100 mm
Package: packed in a plastic sleeve plus a cardboard box
Gutter endcap
You have to put a universal gutter endcap at its end on the left or right.
Material: Granite®Rain ArcelorMittal
Size: ø 125 mm and ø 150 mm
Package: packed in a plastic sleeve plus a cardboard box
Rafter holder
Mounted to rafters or ridge beams if due to roof structure it is impossible to use gutter hanger fitted to a fascia board.
Material: zinc flat bar and powder covered in system colour plus rubber seal
Size: ø 125 mm and ø 150 mm
Package: 50 pcs. / cartoon package
Gutter hanger
Element holding the gutter, mounted to the fascia board, reinforced by embosses increasing stiffness.
Material: galvanised, powder - coated sheet
Size: ø 125 mm and ø 150 mm
Package: packed in a plastic sleeve plus a cardboard box
Clamp and dowel
Cascade system element responsible for holding the downspout. The Kaskada clamp has special rivet nuts with limiter, enabling quick and easy assembling the dowel to a wall. Inside the clamp there is a rubber seal protecting the pipe against sliding and scratching. Clamp manufactured of a sheet with thickness of 1.5 mm.
Material: powder-coated galvanised sheet metal
Size: ø 100 mm
Package: packed in a plastic sleeve plus a cardboard box
Connection piece
Joins two gutters or the gutter with the corner. The connection piece supports “click” system and due to use of the rubbery seal makes it a connection tight in 100%. Manufactured from a sheet with tightness of 0.7mm and 1.0mm.
Material: galvanised, powder - coated sheet
Size: ø 125 mm and ø 150 mm
Package: packed in a plastic sleeve plus a cardboard box
Clamp plate
The clamp plate is an essential element for attaching the drain pipe clamp to sandwich panels.
Material: galvanised, powder - coated sheet
Size:
Package: packed in a plastic sleeve plus a cardboard box
Available colors
Gutter system ø 125
RAL 3009
RAL 6020
RAL 7016
RAL 7024
RAL 8004
RAL 8017
RAL 9005
Gutter system ø 150
RAL 7016
RAL 7024
RAL 8017
RAL 9005
See more
